+
+
+
+
+
+
+
Mainboard Short Circuit Detection Pen Rosin Atomizing Pen Mobile Phone Repair Mainboard PCB Detection Pen
Description:
1. Used for motherboard maintenance and inspection.
2. Powered by built-in 280m Ah battery with voltage adjustment system, it will meet your different needs.
Instructions
In order to ensure the normal use of the equipment, please charge the equipment for a while before use.
1. Cut/Smash the rosin block into small pieces.
2. Pull out the glass cover, use tweezers to take a small piece of rosin, and put it into the rosin block atomizing pen.
3. Put on the glass cover and turn it on.
4. Quickly press the button 5 times, the green light indicates the rosin pen is turned on to use.
5. Keep pressing and holding the power button to continue to heat the rosin, and the rosin will evaporate into smoke for using
6. Rotate the button at the bottom to adjust the power. The greater the power, the faster the evaporation
7. After using, quickly press the power button 5 times, the red light indicates the power is off. Close the lid and put the pen in a place
Notice
Please avoid inhaling smoke into your mouth and nose. Do not use for more than 30s at one time, otherwise the glass may be damaged due to heat.
